Effect of nano-MgO on mechanical performance of cement stabilized silty clay     

Kai Yao  Dongliang An  Na Li  Chen Zhang  Aizhao Zhou 《Marine Georesources & Geotechnology》2020,38(2):250-255

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.  相似文献   

Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress     

Wenqian Dong  Xiuqing Hu  Hongtao Fu 《Marine Georesources & Geotechnology》2020,38(7):770-785

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.  相似文献   

Undrained monotonic shear behavior of marine soft clay after long-term cyclic loading     

Lin Guo  Hongxu Jin  Li Shi 《Marine Georesources & Geotechnology》2020,38(7):854-866

Abstract

In the coastal area, nearshore and offshore structures have been or will be built in marine soft clay deposits that have experienced long-term cyclic loads. Therefore, the mechanical behavior of marine clay after long-term cyclic loading needs to be investigated. In this research, a series of monotonic and cyclic triaxial tests were carried out to investigate the postcyclic mechanical behavior of the marine soft clay. The postcyclic water pore pressure, shear strength and secant stiffness are discussed by comparing the results with the standard monotonic test (without cyclic loading). It is very interesting that the postcyclic behavior of marine soft clay specimen is similar to the behavior of overconsolidated specimen, that is, the specimen shows apparent overconsolidation behavior after long-term cyclic loading. Then relationship between the overconsolidation ratio and the apparent overconsolidation ratio is established on the basis of the theory of equivalent overconsolidation. Finally, a validation formula is proposed which can predict the postcyclic undrained shear strength of marine soft clay.  相似文献   

回填土不确定性对场地地震反应的影响          下载免费PDF全文

张海  陈贺  尤红兵  李克强 《地震工程学报》2019,41(2):370-377

选取某核电场地控制性钻孔的厚度、剪切波速、密度等实际勘探数据,通过改变回填土剪切波速,分析了回填土不确定性对场地地震动参数的影响。研究结果表明:在回填土层厚度不变和模型总厚度不变的情况下,地表的水平向峰值加速度随着回填土剪切波速的增大而减小,但水平向峰值加速度增幅逐渐减小;回填土剪切波速到达一定的波速就不再影响地表水平峰值加速度;随着回填土剪切波速的增加,整个反应谱的谱值都普遍减小。  相似文献   

飑线对定点地形变观测的影响特征与机理——以陕西关中盆地为例     

杨小林  危自根  杨锦玲  王党席 《中国地震》2019,35(3):465-475

2013年7月31日～8月1日陕西关中盆地爆发了一次强飑线灾害性天气过程,为揭示此次飑线生命史期间对定点地形变观测的影响特征与机理,本文结合多普勒天气雷达和气象资料,系统分析了关中盆地内4个地形变观测数据。结果表明:(1)飑线过境时的短时气压突变是造成定点地形变的主要原因,引起最大的地倾斜和地应变分别达9.70×10~(-3″)和21.02×10~(-9);(2)气压变幅与地形变的弹性响应量具有较好的线性关系,二者持续时间较一致,为2～4h,其中,钻孔体应变的动态气压系数达4.04×10~(-9)/h Pa;(3)宝鸡、乾陵和华阴台对飑线的响应能力较好,西安台则较差;(4)除水管仪外,垂直摆、洞体应变和钻孔体应变等对飑线的响应均较为灵敏。上述结果有助于合理识别和科学推定飑线所导致定点地形变异常变化的物理本质,进而减少实际业务中的误判;同时,还能为定点地形变观测台站的科学选址、仪器的优化布设及不同空间尺度大气负荷模型的实证等提供重要的参考依据。  相似文献   

印度河上游Bagrot山谷降水稳定同位素变化及与水汽来源的关系          下载免费PDF全文

王邺凡  余武生  张寅生  张腾  高海峰  MUHAMMAD Atif Wazir 《干旱区地理》2019,42(2):252-262

利用2015年8月至2016年7月在印度河上游流域Bagrot山谷降水稳定同位素（δ18O和δD）观测结果以及当地气象资料，利用同位素示踪及统计分析方法，并结合HYSPLIT模型，对研究区降水稳定同位素变化特征、大气水线以及水汽来源进行了分析。结果表明，观测期间Bagrot山谷降水稳定同位素的季节变化明显，δ18O与δD秋冬季偏低，春夏季偏高，且与气温变化一致，存在显著的温度效应，而降水量效应不明显。而且发现，研究区局地大气水线截距和斜率均低于全球的，反映了降水过程中云下二次蒸发作用较为强烈，特别是，不同的降水形态导致该研究区局地大气水线的斜率和截距不同。当液态降水（降雨）发生时，由于在较为干旱的气候环境下，雨滴在降落的过程中受到二次蒸发相对较强，使得局地大气水线的斜率和截距偏低；而当固态降水（降雪）发生时，由于温度较低，受再循环水汽和二次蒸发的影响较小，导致局地大气水线的斜率和截距均偏高。Bagrot山谷及其周边地区，从南到北局地大气水线的斜率相差不大，而其截距总体上随着纬度升高而降低，可能与云下二次蒸发导致稳定同位素发生的不平衡分馏逐渐强烈有关。通过Bagrot山谷站点降水稳定同位素观测结果并结合HYSPLIT模型的后向追踪，研究还发现，研究区全年主要受西风环流以及局地环流的影响。但与研究区以北的临近站点（慕士塔格、和田等）相比有所不同，由于Bagrot山谷位置更靠南，其仍然偶尔受到来自南方的海洋性水汽影响。这一研究结果可能对该地区树轮稳定同位素记录的解译具有一定的指示意义。  相似文献   

多源地理空间矢量数据关联分析   总被引：1，自引：1，他引：0  

郭黎  姜晶莉  李豪  王云阁 《测绘通报》2020,(6):71

针对多源地理空间矢量数据多来源、难以集成综合利用这一现状，本文提出了多源地理空间矢量数据关联方法，并以此为基础构建了多源地理空间矢量数据关联的可视与计算查询系统。首先，对多源地理空间矢量数据关联的概念及分类进行了定义。然后，以此为基础，提出了关联关系构建技术：自适应四叉树编码技术、扫描线技术、几何匹配及语义匹配技术。最后，为实现关联关系的直观展示，设计了原型系统。关联技术的提出可建立起多源地理空间矢量数据之间的关联关系，原型系统的构建也为用户综合利用多源地理空间矢量数据提供了平台，提高了数据的利用率及数据查询的效能。  相似文献   

Test and analysis of reinforced concrete (RC) precast shear wall assembled using steel shear key (SSK)     

Shao-Dong Shen  Peng Pan  Qi-Song Miao  Wen-Feng Li  Run-Hua Gong 《地震工程与结构动力学》2019,48(14):1595-1612

Reinforced concrete (RC) precast shear walls are extensively applied in practical engineering, owing to their fast construction speed. However, because of the transport conditions, RC precast shear walls have to be separated into small wall segments during the factory prefabrication procedure before being assembled on site. Typically, wet-type jointing methods are adopted to link the segments, which is time-consuming and results in unreliable post-pouring area strength. To overcome this problem, the novel scheme of the steel shear key (SSK) featuring steel shear panels and combined fillet and plug welding is proposed. Three RC precast shear wall specimens with different linking strength, termed as weakened SSK wall, standard SSK wall, and strengthened SSK wall, respectively, and an integrated shear wall specimen were designed. Quasi-static cyclic loading was applied to investigate the specimens' dynamic properties. The test results suggest the prefabricated wall segments equipped with SSKs showed reliable stiffness and bearing capacity and were improved in energy dissipation ability, compared with conventional shear walls. As the shear stiffness and number of equipped SSKs increased, the specimens exhibited higher strength, but their ductility and energy dissipation were slightly decreased. Most importantly, the standard SSK wall specimen could achieve satisfactory bearing capacity and deformability and is thus recommended for precast building structures. Finite element method (FEM) models were established to validate the test results, and parametric study analysis was conducted based on the coupling ratio of the SSK walls. Finally, an appropriate coupling ratio range is recommended for practical engineering applications.  相似文献   

固结时间对软土动力特性影响的试验研究     

兰景岩  王延伟  曹振中  刘娟 《震灾防御技术》2019,14(4):742-749

固结试验是研究软土动力特性的重要环节，固结时间是影响软土动力特征参数的重要因素。围绕岩土工程及科研工作中对动三轴试验中固结时间影响规律的认识较为模糊的问题，拟对天津滨海软土开展动三轴平行试验，分别采用8h、12h、24h、48h进行固结，针对软土的最大动剪切模量G_max、最大阻尼比λ_max及动剪切模量比G_d/G_max和阻尼比λ随动剪切应变γ_d的变化规律，分析固结时间对软土动力特性参数的影响。试验结果表明:G_max、λ_max、G_d/G_max-γ_d曲线、λ-γ_d曲线受固结时间的影响较为显著。G_d/G_max-γ_d曲线随着固结时间的增加而减小。阻尼比试验结果表明动剪切应变存在明显的分界点，分界点以下，中长期固结时间所得阻尼比较大，而分界点以上，短期固结时间所得阻尼比较大。  相似文献   

基于新型高频声学多普勒流速剖面仪的河口近底部边界层观测初探     

兰庭飞  吴昊  唐杰平  李占海  汪亚平 《海洋通报》2019,38(6):640-649

河口物质输运、能量交换与底边界层内的水动力过程密切相关,底边界层参数(如切应力、拖曳系数)的确定至关重要。挪威Nortek公司生产的新型声学多普勒流速剖面仪AD2CP相比传统ADCP具有高频、低噪的优点,可用于高频(16Hz)流速剖面观测,而被广泛应用于底边界层观测的ADV只能测量单点高频流速。本文采用AD2CP在长江口南槽最大浑浊带区域进行座底式观测,并与同步近底部三脚架上ADV的观测结果进行对比。结果表明,使用AD2CP测得的近底部平均流速与ADV的测量结果吻合良好;使用惯性耗散法计算了底切应力,基于ADV的单点高频流速数据计算结果为2.16×10~(-2)～5.69×10~(-1)N/m~2,基于AD2CP的结果为2.09×10~(-2)～4.26×10~(-1)N/m~2,二者范围大致相当。在此基础上,基于AD2CP数据计算出摩阻流速为4.55×10~(-3)～2.06×10~(-2)m/s、底拖曳系数范围为1.84×10~(-4)～2.49×10~(-3),与ADV的计算结果基本一致。此外,由于AD2CP可以获得高频的流速剖面数据,优于单点ADV,具备观测近底部边界层参数和边界层内湍流剖面的潜力。  相似文献